How To Set A New Default For Scan To Media - Brother MFC-J425W Software User's Manual

USB cable scanning
Note
• If you choose color in the quality setting, you cannot choose TIFF.
• If you choose black and white in the quality setting, you cannot choose JPEG.
g
The file name is set automatically. However, you can set a name of your choice. You can only change
the first 6 digits of the file name.
Press a or b to choose File Name.
Enter the file name and press OK.
Press .
Note
Use the dial pad to enter the letters.
h
Press Start.
i
If you are using the scanner glass, the LCD displays Next Page?. After you finish scanning, make sure
you choose No before removing the memory card or USB Flash memory drive from the machine.

How to set a new default for Scan to Media

You can set your own default settings.
Setting the new default (For MFC-J825DW/J835DW)
a
Press (SCAN).
b
Press d or c to choose to Media.
c
Press d or c to choose Quality and then the quality you want to set as a new default.
d
Press d or c to choose File Type and then the file type you want to set as a new default.
e
Press d or c to choose Set New Default.
f
Press Yes.
g
Press Stop/Exit.
Factory reset (For MFC-J825DW/J835DW)
a
Press (SCAN).
b
Press d or c to choose to Media.
c
Press d or c to choose Factory Reset.
d
Press Yes.
e
Press Stop/Exit.
12
12
12
12
198