USB cable scanning
How to set a new default for Scan to Media
You can set your own default settings.
Setting the new default
a
Press
(SCAN).
b
Press a or b to choose Scan to Media.
Press OK.
c
Press and choose your new setting. Repeat this step for each setting you want to change.
d
After changing the last setting, press a or b to choose Set New Default.
Press OK.
e
Press 1 or
to choose Yes.
f
Press Stop/Exit.
Factory reset
a
Press
(SCAN).
b
Press a or b to choose Scan to Media.
Press OK.
c
Press a or b to choose Factory Reset.
Press OK.
d
Press 1 or
to choose Yes.
e
Press Stop/Exit.
12
12
12
12
182