Configuring The Scan Button Settings - Brother MFC-J425W Software User's Manual

ControlCenter4

Configuring the Scan button settings

The Device Scan Settings button lets you configure your machine's SCAN key settings.
There are four scan functions which you can configure to fit your scanning needs.
To configure each scan function, select the Device Settings tab and then click Device Scan Settings. The
Device Scan Settings dialog will appear.
Image tab
Lets you configure settings for Scan to Image by pressing the SCAN key on your Brother machine.
Choose the settings for File Type, Target Application, File size, Resolution, Scan Type, Document Size,
Brightness, Contrast and Auto Crop as needed. Click OK.
If you choose Secure PDF from the File Type drop-down list, click the
Set PDF Password dialog box will appear. Enter your password in the Password and Re-type Password
box and then click OK.
Note
• Secure PDF is also available for Scan to E-mail and Scan to File.
• You can change the data compression ratio of the scanned image with File size.
MFC models
3
DCP models
3
(Set PDF Password) button. The
3
3
3
74