Brother iPrint & Scan Guide Manual page 65

Printing
d
Make sure your machine is selected.
If a different machine is selected or if Device Is Not Selected is displayed, make sure your machine is
turned on and then tap Printer.
e
Tap .
Note
If the machine was used previously, you can select the machine from the device list.
f
Enter your machine's IP address, and then tap Connect.
The machine's model name is displayed when the machine is found. Tap the machine to select it.
Note
You can see your machine's IP address on the control panel's network menu. For more details, please
refer to your machine's Network User's Guide.
g
Do one of the following:
 If you want to change other print settings, see Print Settings uu page 62. After changing the settings,
go to step h.
 If you do not want to change any settings, press the Back button and go to step h.
h
Tap .
The machine will start printing.
8
61