Hardware Requirement; Supported Devices And Operating Systems; Network Settings - Brother iPrint & Scan Guide Manual

Introduction

Hardware requirement

Supported devices and operating systems

Brother iPrint&Scan is compatible with the following iOS devices:
 iPhone (iOS 3.0 or greater)
 iPod touch (iOS 3.0 or greater)
 iPad (iOS 3.2 or greater)
Note
Certain features of Brother iPrint&Scan may not be supported by your device.

Network settings

In order to use Brother iPrint&Scan, your mobile device must connect using Wi-Fi to the network that your
Brother machine is connected to. Brother iPrint&Scan supports wireless connections that use infrastructure
mode or ad-hoc mode.
To configure your mobile device for a Wi-Fi connection, please refer to your mobile device's user's guide. A
link to your mobile device's user's guide, which can be viewed on the Apple web site, can be found in the
Bookmarks folder of Safari by default.
To configure your Brother machine for a Wi-Fi connection, please refer to your machine's Quick Setup and
Network User's Guide.
Ad-hoc mode
Connect your mobile device to your machine without a wireless access point/router.
1
1 Mobile device
2 Wireless network machine (your machine)
2
4
4
4
4
4
23