Brother MFC-8510DN Basic User's Manual page 55

For MFC-8910DW
(or if you downloaded IFAX and
E-mail options):
If you have installed the IFAX and E-mail
options on the MFC-8510DN, use this
procedure to store the Speed Dial numbers.
a
Press (Address Book) twice and
enter a three-digit Speed Dial location
number (001-300).
If a number or E-mail address is not
stored there, the LCD shows
Register Now?
Press 1 to choose Yes.
b
Press a or b to choose one of the
following:
Fax/Tel
IFAX
Email Color PDF
Email Color JPG
Email Color XPS
Email Gray PDF
Email Gray JPG
Email Gray XPS
Email B&W PDF
Email B&W TIFF
Press OK.
c
Enter the fax/telephone number (up to
20 characters each) or E-mail address
(up to 60 characters each). For help
entering characters, see Entering text
uu page 152.
Press OK.
Note
• If you selected an E-Mail Registration
Type in step b and save the E-mail
address, you can only use the E-mail
address when you are in SCAN mode.
• If you selected the IFAX Registration Type
in step b and save the E-mail address,
you can only use the E-mail address when
you are in FAX mode.
Dialling and storing numbers
d
Do one of the following:
 Enter the name using the dial pad
(up to 15 characters).
8
Press OK.
 Press OK to store the number or
E-mail address without a name.
e
Do one of the following:
If you want to save a fax/scan

resolution along with the number, go
to the appropriate step as shown in
the following table:
 If you do not want to change the
default resolution, press OK.
Option selected in step b
Fax/Tel
IFAX
Email Color PDF
Email Color JPG
Email Color XPS
Email Gray PDF
Email Gray JPG
Email Gray XPS
Email B&W PDF
Email B&W TIFF
Note
• When you do a broadcast and you have
saved a scan profile along with the
number or E-mail address, the scan profile
of the One Touch, Speed Dial or Group
number you chose first will be applied to
the broadcast.
• For details about the file format
uu Software User's Guide: Using the
Scan key.
• You can also store the number by
pressing Menu, 2, 3, 2.
f
Press a or b to choose the resolution
from Std, Fine, S.Fine or Photo.
Press OK.
Go to step
f
g
8
h
i
j
47