Deleting The Sv-Manager's Password Invalid State; When Both The Unit And Sv-Manager Is In Password Invalid State - Brother SV-100B User Manual

Password Invalid State

Deleting the SV-Manager's Password Invalid State

1
Disconnect the unit from the PC.
• Refer to "Disconnecting the Unit from the PC" on page 22.
2
Turn ON the power to the unit and select the security folder in the unit.
• Refer to "SV-100B User's Guide (Main Unit)".
3
Enter the correct password into the unit.
4
Connect the unit with the PC using the USB cable (included).
• Refer to "Connecting the Unit to the PC" on page 21.
5
Confirm that the security folder can be opened in the SV-Manager.
• Refer to "Opening/Closing the Security Folder" on page 28.

When Both the Unit and SV-Manager is in Password Invalid State

When authorization for both the unit and SV-Manager fails three consecutive times, the password
for the unit and SV-Manager becomes invalid and the security folder does not open. The memory
card has to be initialized by the SV-Manager. Unit-specific files in the security folder cannot be
retrieved. Refer to "Initializing the Memory Card" on page 23.
Files that are not in the security folder can be exported as BVD files from the top folder. Refer to
"Writing Data in an Intermediate File Format" on page 57.
5
65