Download Print this page

Brother SV-100B Quick Start Manual

Document viewer
Hide thumbs Also See for SV-100B:

Advertisement

Quick Links

Quickstart Guide

Thank you for purchasing the BROTHER DOCUMENT VIEWER
SV-100B.
The Quickstart Guide provides a simple explanation of the
operating procedures leading up to the use of the SV-100B
(herein referred to as the unit).
Carefully read "SV-100B User's Guide (Main Unit)" and
"SV-Manager User's Guide (PC Software)" for cautionary
points and detailed explanations ensuring safe operation
and increased convenience when using this equipment.
Trademarks
·
The names of the operating systems have been abbreviated in
this document.
·
®
®
The Official Name of Windows
XP is Microsoft
Windows
operating system.
·
®
®
The Official Name of Windows
Vista is Microsoft
Windows
®
Vista
operating system.
·
®
®
®
Microsoft
, Windows
, Excel, Word, Power Point
, and Windows
Mobile
are registered trademarks of the Microsoft
TM
Corporation in the US and other countries.
·
®
Bluetooth
is a registered trademark of Bluetooth SIG, Inc.
Brother Industries has a license to use this name.
·
Acrobat
®
and Adobe are registered trademarks or trademarks of
Adobe Systems Incorporated in the US.
·
microSD
TM
is a trademark of SD Association.
·
Any other company, product, or service name listed in this
document is the registered trademark or trademark of the
respective company
Brother International Corporation
100 Somerset Corporate Boulevard Bridgewater,
NJ 08807-0911 USA
TEL : (908) 704-1700
LW9135001
Introduction
This device is an easily portable, convenient document viewer that uses
electronic paper. This device makes a large amount of documents portable
and the contents can be immediately displayed. Even when the power is
turned OFF, the contents can still be displayed. The device can be used for
extended periods as the device is set to power-saving mode even while the
device is displaying a document.
Store this document in a safe and readily accessible location after
reading.
· The contents of this document may change without prior notice.
· The contents of this document, in part or in whole, may not be duplicated
or reprinted without prior consent.
· Although this document has been checked for accuracy, contact us if there
are any questionable points or errors.
· This company shall not be responsible for any damage cause by
earthquakes, fires (unless this company is found liable), third party acts,
other accidents, intentional act or negligence by the customer, misuse, or
other special conditions.
· This company shall not be responsible for any other damage (loss, loss of
income, loss of earnings, interruption of business, loss of means of
communication) caused by the use or the unusable state of this device.
· In the event that this device is defective due to the manufacturing process
of this company, this product shall be replaced. This company shall not be
obligated to replace the product under any other circumstance.
· This company shall not be responsible for any damage caused by the
®
XP
malfunction of the device due to the connection of third party devices or
software.
®
This software is based in part on the work of the Independent JPEG Group.
Federal Communications Commission (FCC) Declaration of Conformity
(For USA Only)
Responsible Party: Brother International Corporation
100 Somerset Corporate Boulevard Bridgewater, NJ
08807-0911 USA
TEL: (908) 704-1700
declares that the product
Product Name: Brother Document Viewer SV-100B
Model Number: SV-100B
complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
·
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
·
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
·
Consult the dealer or an experienced radio / TV technician for help.
·
The enclosed interface cable should be used in order to ensure
compliance with the limits for a Class B digital device
FCC WARNING
·
Changes or modifications not expressly approved by Brother
Industries, Ltd. could void the user's authority to operate the
equipment.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Preparations Before Use
Confirm the items included before using the device.
1
Confirm the Included Items
Confirm the unit and the items included.
Main Unit
Soft Case
microSD Memory Card
Special Recharging AC Adapter
(2GB)
Battery (Special Rechargeable
USB Cable
Lithium Ion Battery)
Quickstart Guide
CD-ROM
(including Quickstart Guide,
* This document
User's Manual, and bundled
software)
2
Insert the Battery and Memory Card
into the Unit
[1] Slide and remove the battery cover.
·
Push the mark in the center to unlock
and open. Slide and remove the
cover.
[2] Securely insert a new battery into
the unit ensuring the terminals make
contact.
Insert the battery and match
the + and - signs printed on
the face of the battery to the
terminals on the unit.
[3] Turn the metallic terminals of the
memory card to the display panel
and push until the memory card locks.
Be careful not to touch the
metallic terminals when
handling the memory card.
This may result in poor
Press
contact.
[4] Securely close the battery cover.
Ensure that the battery cover
has been securely closed. If
the cover is not properly
closed, water leakage may
cause this device to
malfunction.
3
Charge the Unit
[1] Open the connector cover.
[2] Connect the round plug of the AC
adapter to the unit's AC adapter
connector and the power plug to
an AC100V outlet.
[3] Confirm that the Status Lamp
(orange light on the left) is lit.
·
It takes about 3 hours to charge
the battery.
Lit
[4] Charging is complete when the Status Lamp (orange
light on the left) turns off. Remove the AC adapter plug
from the unit.
The battery can be charged using a USB connection
with the PC. It takes about 5 hours to charge the
battery in this manner.
4
Confirm that the Unit can be
Powered ON and OFF.
Mark
Confirm that the unit operates by turning the power ON/OFF.
[1] Press
.
[2] After the Status Lamp (green) flashes, confirm that the
folder name appears on the screen.
·
Confirm that the name of the top
folder "SV-100B" and the
subfolders, "Main folder" and
"Security folder", display.
[3] Press
.
[4] When the Status Lamp (green)
flashes, confirm "Shut down
automatically in 10 sec."
(Continued overleaf)
Connector
Cover
Orange Lamp
Press
Press

Advertisement

loading

Summary of Contents for Brother SV-100B

  • Page 1: Quickstart Guide

    The Quickstart Guide provides a simple explanation of the Store this document in a safe and readily accessible location after connector and the power plug to operating procedures leading up to the use of the SV-100B reading. an AC100V outlet.
  • Page 2 The following explains the installation of the SV-Manager. [Brother SV-Manager] from the Windows Start Menu. Displaying the Content [2] Open the [Print] dialog using the application software. [3] Confirm that the printer is set to "Brother SV-100B" and Confirming the Operating [1] Select the "Main folder". print.