Table of Contents
Advertisement
Message
<Auto Error Skip>
Cause
The printer received 2-sided printing data of
paper sizes (including the orientation) or paper
types unavailable for automatic 2-sided printing.
Solution 1
Press [
However, the data on each side is printed on two
pages.
Solution 2
Perform the following procedure.
1. Perform a soft reset.
- "Canceling a Job" (See p. 121)
2. Change the setting to a paper size or type
available for automatic 2-sided printing, and
then print again.
Cause 1
The fixing unit is being cooled down (especially
after printing narrower paper) to maintain print
quality.
Solution
Please wait a moment.
When the fixing unit cools down, printing
resumes.
Cause 2
If the printer is used continuously for an extended
period of time, the internal temperature of the
printer increases, activating a safety mechanism
and pausing printing temporarily.
Solution
Please wait a moment.
When the inside of the printer cools down,
printing resumes.
If the internal temperature of the printer has not
decreased sufficiently, the safety mechanism is
reactivated and printing is paused temporarily.
When the inside temperature cools down
sufficiently, the printer resumes the normal
printing speed. The time until the safety
mechanism activates or until the printer resumes
the normal printing speed varies depending on
the printer usage conditions.
Cause and Solution
] (
) to continue printing.
135
Advertisement
Table of Contents
