Ink Low Warning Reset By Button Operation - Canon BJC-85 Reference Manual

5-3. INK LOW WARNING RESET BY BUTTON OPERATION

Ink low warning
This printer detects the remaining ink level by counting the number of ejected ink dots in
the same way as the BJC-80/80v. When the setting of the ink low warning is enabled, and
the remaining ink gets low, the beeper sounds twice, and the ERROR LED blinks.
Pressing the cartridge replacement button will sound the beeper and move the carriage to
the center, and the ERROR LED indicates the ink cartridge for which the remaining ink is
low as shown below.
Blinks once: when the remaining ink of the BCI-10 / BCI-11Bk / BCI-12Bk is little
Blinks twice: when the remaining ink of the BCI-11Color / BCI-12Color is little
Blinks 3 times: when the remaining ink of the BCI-11 BK & Color / BCI-12 BK & Color is little
The ink low warning reset function by button operation is added to this printer. The button
operation procedures are shown below. (The ink low warning of the BJC-80/80v can be
reset from the host computer only.)
Operation
1) Turn on the printer.
2) Press the cartridge replacement button to move the carriage to the center.
If the carriage was moved to the center by signals from the PC, the reset operation
by the cartridge replacement button is not possible.
3) Make sure that the proper cartridge is installed in the carriage. If not, install the proper
one. (The ink dot counter reset is effective only to the ink cartridge type installed in
the carriage.)
4) Press and hold the RESUME button for the number of beeps corresponding to the
warned ink type to select the ink type for which the dot counter is to be reset, and
release the RESUME button. The number of beeper sounds is as follows:
Once:
Twice:
3 times:
4 times:
5) Press the cartridge replacement button.
The ink dot counter selected in the procedure 4) and the ink low warning are reset, and
at the same time, the carriage returns to the home position.
The dot counter of the BCI-10/BCI-11Bk/BCI-12Bk is reset.
The dot counter of the BCI-11Color/BCI-12 Color is reset.
The dot counter of the BCI-11Bk&Color/BCI-12Bk&Color is reset.
The selected ink type is canceled.
11