Checking The Operation - Canon NP6320 Service Manual

CHAPTER 8 INSTALLATION
C.

Checking the Operation

Step
1 Turn the door switch ON using the door
switch actuator.
2 Connect the power plug, and shift the
POWER switch to "ON".
3 Set the cassette size to suit the needs of the
user.
4 Put copy paper in the cassette, and set the
cassette in the copier.
5 Set the copy tray on the copier.
6 Open the copyboard cover, and remove the
paper and the protection seal from the
document size plate.
7 Record the reading of the copy counter.
8 After making any copies of the following:
The Copy Start key goes red.
[1] making 5 continuous copies on A3
[2] making 8 continuous copies on A4
[3] making 3 single copies on A3
[4] making 4 single copies on A4
9 Check that counter operations properly.
8-6
COPYRIGHT © 1999 CANON INC.
Work
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Check that the Add Paper and Cassette Out
indicators go ON and the Wait indicator
lights red.
See p. 8-9.
• Check that the Add Paper indicator goes
OFF.
• Press the keys, except the Copy Start
key, on the control panel, and check that
each operation is correct.
Check the following:
• No abnormal sound is heard.
• The Add Toner indicator starts to flash
when the Copy Start key on the control
panel turns red at the end of copying for
any of the following:
[1] making 5 continuous copies on A3
[2] making 8 continuous copies on A4
[3] making 3 single copies on A3
[4] making 4 single copies on A4
Check that the reading has increased by the
number of copies made from the reading
recorded in step 8.