13. Installation Position of Side Seals
1) Clean the surface on which the side magnetic seal will be hooked using alcohol.
2) Fix the side magnetic seal at the position shown in Figure 10-219.
Note:
Put the hook of the magnetic side seal on its side on the plastic marking so that the magnetic
side seals is firmly in the correct position.
Blade
COPYRIGHT © 1999 CANON INC.
Screw hole
Magnetic
Butted.
side seal
Figure 10-218
Sponge
Magnetic cylinder
Magnetic
side seal
Figure 10-219
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 TROUBLESHOOTING
Sponge
10-13