Delivery Assembly Stationary Jam; Delivery Assembly Delay Jam - Canon NP6320 Service Manual

B.

Delivery Assembly Stationary Jam

If the copy does not pass the delivery assembly paper sensor within the specified period after
the registration roller clutch (CL1) operates, the microprocessor will judge that a delivery unit
stationary jam has occurred, and immediately stop the operation of the copier. Also, the JAM
indicator on the control paper will flash and a segment of the Paper Select/Jam indicator will go
ON.
Registration roller clutch (CL1)
Jam check
Delivery paper sensor (Q5) signal
Main motor (M1)
Figure 5-203 (delivery assembly stationary jam, A4 size)
C.

Delivery Assembly Delay Jam

If the copy does not reach the delivery assembly paper sensor within the specified period after
the registration roller clutch (CL1) has operated, the microprocessor will judge that a delivery
assembly delay jam has occurred, and immediately stop the operation of the copier. Also, the Jam
indicator on the control panel will flash and a segment of the Paper Select/Jam indicator will go
ON.
Registration roller clutch (CL1)
Jam check
Delivery paper sensor (Q5) signal
Main motor (M1)
Figure 5-204 (delivery assembly stationary jam, A4 size)
COPYRIGHT © 1999 CANON INC.
Copy Start
key ON
SCFW
INTR SCRV
6.4 sec
Normal
Copy Start
key ON
SCFW
INTR SCRV
4.6 sec
Normal
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
Jam indicator
SCFW
SCRV
6.4 sec
Abnormal
Jam indicator
flashes
SCFW
SCRV
4.6 sec
Abnormal
flashes
5-9