Canon RE-350 Control Interface Commands Manual page 61

RE-350 Demo Application (
How to Use the Demo Application:
The Demo Application is a 16bit application that runs under Windows 95 and Windows 3.1.
RE-350
1. Connect the to the computer. Using a correctly pinned
RE-350
output on the
232C RE-350
2. Turn on the
RE-350 and the computer and launch Windows.
3. In the directory that was created from the SDK disk is a file named
APP
into your System folder within Windows [c:\Windows\System].
4. Double click on the
RE-350
When the application has successfully launched, the On-Line
and within the of the software interface.
GUI
Very simply the Demo Application offers remote operation of all manual buttons and control knobs located on
RE-350
the front control panel via the
If the Application Does Not Launch Properly Check:
Port Setting – The
COM COM
the
RE-350
Setting – The
ID ID
set to.
Baud Rate – The Baud Rate setting selection in the
selected via the switch on the rear panel of the
Cable – Make sure you are using a correctly pinned cable. Check with the pin out diagram on pp.
RE-350 SDK File Definitions
re350.c
re350.h
re350.obj
re350dll.dll
re350dll.mak
example.c
example.obj
example.exe
example.def
example.mak
readme.doc
)
\APP
and connect the other end to an available
Demo Application icon in the
graphical user interface.
RE-350
port setting selection in the
is connected to on the computer.
Setting on the rear panel of the
RE-350 communications driver.
Driver definitions.
Object file.
Dynamic Link Library.
Microsoft C/C++ Version 1.52 Project (NMAKE)
Sample Windows application.
Object file
Executable Windows Application
Module definition file.
Microsoft C/C++ Version 1.52 Project (NMAKE)
This file.
cable (pp.
RS-232 57–59
port on your computer.
COM
CTL3DV2.DLL
directory.
APP
should be lit on the
LED RE-350
Demo Application should match the
RE-350
(p.3) should match the
RE-350
Demo Application should match the baud rate
RE-350
(p.3).
RE-350
) connect one end to the
RS-
. This file should be placed
's front control panel
port
COM
the is
ID Setting RE-350
57–59
.
61