Canon RE-350 Control Interface Commands Manual page 27

Zoom: Stop
• Function:
Stops the movement of the zooming lens.
• Timing of the "C-response Packet" sent to the PC:
Right after the zoom lens stops to move.
• The parameter of the "C-response Packet":
$0000 fixed
• The maximum operation time (msec):
500 millisecond
• Command format:
Header ID number
$10
Zoom: Access To Position
• Function:
Moves the zoom lens to a designated position determined by the parameter in this command packet.
• The available parameter value:
LSH: $00 ~ $FF
• Timing of the "C-response Packet" sent to the PC:
Right after the zoom lens reaches the designated position.
• The parameter of the "C-response Packet":
$0000 fixed
• The maximum operation time (msec):
9000 millisecond
• Command format:
Header ID number
$10 $ 8 *
Command
$ 8 * $ 0 2
Command
$ 0 3
Parameter MSH Parameter LSH
$ 0 0
Parameter MSH Parameter LSH
$ 0 0 $ * *
$ 0 0
27