Fp Data Packet Table - Canon RE-350 Control Interface Commands Manual

2.6 FP Data Packet Table

FP data description
Front panel switch information
FP Data Packet
When the is in [N
RE-350
each button and control knob every time the condition varies.
The bit assignment of the parameter is as follows:
D15 D14
W/B Vol 0
D7 D6
Detail Vol EXP Vol
If a control knob has not been used for longer than
the corresponding control knob bit cleared.
Note: If the signal line of the PC is off and the
RTS
the " -Data Packet" which explains the button and control knob condition at the time when the
FP
line comes on.
] Mode, it will send the "
OTIFICATION
D13 D12
Focus Auto B/W
D5 D4
Back light Lights
500
1 byte 2 byte
Header ID #
$30 $8*
Data Packet" to the
FP
D11 D10
W/B Auto Nega
D3 D2
Zoom Tele Zoom Wide Focus Far Focus Near
milliseconds, the
RE-350
is in [N
RE-350
OTIFICATION
3 byte 4 byte
EVENT# Para(H)
$00 $**
. This tells the condition of
PC
D9 D8
Inputselect 0
D1 D0
will send the " -Data Packet" with
FP
] Mode, the will start to send
RE-350
RTS
5 byte
Para(L)
$**
signal
24