Zoom - Canon RE-350 Control Interface Commands Manual

Zoom Wide: Constant Speed w/ AF
• Function:
Moves the zoom lens in the wider direction at a constant speed. This operation will be stopped with the reception
of the <Stop Zooming> command or if the zoom lens reaches the wide-end limit.
• Timing of the "C-response Packet" sent to the PC:
Right after the zoom lens start to move.
• The parameter of the "C-response Packet":
$0000 fixed
• The maximum operation time (msec):
500 millisecond
• Command format:
Header ID number
$10 $ 8 *
Zoom Tele: Constant Speed w/ AF
• Function:
Moves the zoom lens in the tele direction at a constant speed. This operation will be stopped with the reception of
the <Stop Zooming> command or the zoom lens reaches the tele-end limit.
• Timing of the "C-response Packet" sent to the PC:
Right after the zoom lens start to move.
• The parameter of the "C-response Packet":
$0000 fixed
• The maximum operation time (msec):
500 millisecond
• Command format:
Header ID number
$10 $ 8 *
† The speed of the zooming will be constant from the beginning to the end of this operation. This is different from
when the {
ZOOM WIDE
} button is pushed and continues to be pushed for longer than one second, the zooming will increase to a
TELE
faster speed.
The responds with a C-response data packet immediately after the reception of this command, but it is still
RE-350
working on the Zoom control and
†
Command
$ 0 5
†
Command
$ 0 6
} or { } button on the front panel is pushed. If the {
ZOOM TELE
adjustment.
AF
Parameter MSH Parameter LSH
$ 0 0 $ 0 0
Parameter MSH Parameter LSH
$ 0 0 $ 0 0
} or {
ZOOM WIDE

ZOOM

29