Adjusting Buckle Position - Britax Frontier 85 SICT User Manual

Child Seat Functions
Booster Mode: Head Restraint Adjustment
Head restraint adjustment is for use in Booster
WARNING!
Mode ONLY. DO NOT Use the head restraint adjuster when the
harness is attached.
Locking Screw
storage
Remove the locking screw
1
from the head restraint
adjuster and insert into the
shell to store for later use.
IMPORTANT: The vehicle belt must be positioned at or above the
child's shoulder through the shoulder belt guide.

Adjusting Buckle Position

Removing the Buckle
Unbuckle the harness by
1
pressing the release button
and pulling the tongues.
Locate the buckle retainer on
2
the bottom of the child seat.
Slide the buckle retainer up
3
or down to release it from the
child seat shell.
14
Lift the head restraint
2
adjuster release to move
the head restraint.
2
Pull the buckle retainer away
4
from the child seat to loosen.
Turn and push the buckle
5
retainer through the slot in the
child seat shell.
Pull the buckle retainer
6
through the slots in the child
seat shell and cover to the top
of the child seat.
Re-threading the Buckle
IMPORTANT: Select the slot
closest to, but not under the child.
Turn and push the buckle
1
retainer through the slot in the
cover and child seat shell.
Pull the buckle retainer
2
through the slots in the cover
and child seat shell to the
bottom of the child seat.
Slide the buckle retainer back
3
into place to hold it against
the child seat shell.
Pull the buckle away from the
4
child seat until tight.
* Ensure that the buckle strap is
not twisted.
Child Seat Functions
15