Britax Frontier 85 SICT User Manual page 25

Care and Maintenance
Replace the belly pad.
9
a Pull the elastic strap around the
buckle.
b Push the buckle through the belly
pad.
Attach the hook and loop
10
fasteners on the head restraint
cover around the harness.
Reattach the clips behind the
11
arm rests and slide the fabric
under the lower belt guides.
Cleaning the Buckle
If your child eats and drinks while in the child seat, you may need
to check the buckle periodically and rinse out any accumulated
debris or dried liquids.
Buckle Removal
Locate the metal retainer on the
1
bottom of the child seat, and
slide the retainer up to release it
from the child seat shell.
Turn and push the buckle
2
retainer through the shell and
cover to the top of the seat.
* Pull the belly pad over the
buckle retainer to remove.
46
9a
9b
10
To Clean:
• THOROUGHLY RINSE the buckle using warm water.
• TEST THE BUCKLE by fastening and unfastening until a positive
click is heard after inserting each buckle tongue. If clicks are not
heard, repeat the cleaning procedure.
• TOWEL DRY
• DO NOT:
* Soak
* Lubricate
* Use solvents
* Use soap or household detergents
Buckle Replacement
Select the slot closest to, but not under the child.
1
Turn and push the buckle
2
retainer through the slots in
the cover and shell to the
bottom of the child seat.
Pull the buckle away from the
3
child seat until tight. Verify that
the buckle retainer lies flat
against the child seat shell.
* Ensure that the buckle strap is
not twisted and that the button
faces out.
Care and Maintenance
47