Figure 2-9 Raising the Server Off the Pallet Cushions
6.
Carefully roll the lifter and server away from the pallet. Do not raise the server any higher
than necessary when moving it over to the rack.
7.
Follow the HP J1530C Rack Integration Kit Installation Guide to complete these steps:
•
Mounting the server to the slides
•
Installing the cable management arm (CMA)
•
Installing the interlock device assembly (if two servers are in the same cabinet)
Wheel Kit Installation
Compare the packing list
installation. For a more updated list of part numbers, go to the HP Part Surfer web site at:
http://www.partsurfer.hp.com.
Table 2-1 Wheel Kit Packing List
Part Number
A6753-04013
A6753-04002
A6753-04003
A6753-04004
A6753-00007
A6753-04001
A6753-04005
38
Installing the Server
(Table
2-1) with the contents of the wheel kit before beginning the
Description
Wheel Kit consisting of the following components:
Side cover
Side cover
Top cover
Caster cover
Right front caster assembly
Right rear caster assembly
Quantity
1
1
1
1
2
1
1