Table of Contents
Advertisement
IMPORTANT:
other troubleshooting options.
NOTE:
Determine whether a previous service case might be related to the current problem. For example, a
fan detection issue may be caused by a loose connection resulting from previous service.
NOTE:
Most of the time, effective troubleshooting can prevent a system board replacement.
Items that may prevent resolution of the issue:
The information provided about the issue omits key details, including any actions taken before the issue
●
occurred.
●
BIOS, software, and drivers have not been updated.
Cables or connections are loose.
●
Technician is unaware of information available from the HP Support website (i.e., CA - Customer
●
Advisory).
The issue is related to existing or known issues that may be identified in existing support articles.
●
●
Technician may have omitted steps in the provided repair instructions (e.g., Spare Part Replacement
Instructions).
Skipping one of steps from Troubleshooting Methodology table results in No Defect Found (NDF)/No
●
Fault Found (NFF)/No Issue Detected (NID) messages.
Verify solution
Verify that the implemented solution works. Reboot the system or device and try to complete the task
●
that produced the issue.
If a part has been replaced, verify other basic functions. For example, GPU replacement requires
●
keyboard removal. Therefore, it is good practice to verify all basic components to be sure that the
solution is complete.
Explain to the customer why the issue occurred and what was done to resolve it. If the solution you used
●
was in an HP Public document, provide the document information to the customer, letting them know it
can be located on www.hp.com. Also, tell them that there are other solutions available on the website.
Advise the customer to check the website first when they have an issue. It may save them time calling in.
Document the correct issue. Update the case with as many details as possible for other agents and
●
engineering to analyze and study for lessons learned.
Helpful Hints
After you become familiar with the general troubleshooting steps above
on page
76), follow the helpful hints below before running diagnostics and troubleshooting.
At startup
TIP:
If you have installed an operating system other than the factory-installed operating system, go to
http://www.hp.com/go/quickspecs
1.
Be sure that the computer is plugged into a working AC outlet.
2.
Be sure that power is connected to the docking station if a dock is used.
3.
Be sure that the AC adapter light is on.
System board failure is not common. Do not replace the system board until you have tried all
and verify that it is supported on your system.
(General troubleshooting steps
Helpful Hints
91
Advertisement
Table of Contents
Troubleshooting
