Installation Surface - Miele W 163 Operating Instructions Manual

Installation

Installation surface

A concrete floor is the most suitable
installation surface for a washing
machine. It is far less prone to vibration
during the spin cycle than wooden
floorboards or a carpeted surface.
,
Ensure that the machine feet and
the floor are dry to prevent the
machine from slipping during the
spin cycle.
To avoid vibrations during spinning
the machine should not be installed
on soft floor coverings.
^ Remove the transit fittings as
described on the previous page.
^ Level the machine.
It needs to stand perfectly level on all
four feet to ensure safe and proper
operation.
Do not unscrew the machine feet as
this would prevent the machine from
being moved around easily.
50
If installing on a wooden joist floor:
– We recommend a plywood base ( at
least 60 x 45 x 3 cm). The base
should span several joists and be
bolted to the joists and not only to
the floorboards. Check for the
presence of pipes and cables first.
– If possible, install the machine in a
corner, as this is usually the most
stable part of the floor.