Download  Print this page

Miele W1113 Product Dimensions

Large capacity washing machine angled control
Hide thumbs
   

Advertisement

Product Dimensions

Large Capacity Washing Machine
Angled control
W1113
Location Codes
D -
5 foot flexible drain hose connects
upper left rear.
E -
208-240 Volt - 15 Amp 5 foot 4-wire
(2 live / neutral / ground) molded plug
power supply connects upper right
rear (NEMA 14-30 Configuration).
W -
5 foot separate flexible hot and cold
water intake hoses connect upper left
rear.
• All installations must be done in accordance with local codes
• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
• Optional Easy Installation Kits utilize existing 208-240 Volt - 30 Amp line to
connect two Miele machines without rewiring.
• Remove transport struts in rear of machine before installation.
E
W
D
Notes
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706

Advertisement

Table of Contents
loading

  Summary of Contents for Miele W1113

  • Page 1: Product Dimensions

    • See "Cut-out Dimensions" sheet for undercounter or built-in space requirements • Optional Easy Installation Kits utilize existing 208-240 Volt - 30 Amp line to connect two Miele machines without rewiring. • Remove transport struts in rear of machine before installation.
  • Page 2 • See "Cut-out Dimensions" sheet for undercounter or built-in space requirements • Optional Easy Installation Kits utilize existing 208-240 Volt - 30 Amp line to connect two Miele machines without rewiring. • Remove transport struts in rear of machine before installation.
  • Page 3: Cutout Dimensions

    C - Cutout for Electric and Vent or Drain pass-through. Adjust according to duct or drain location. • Needed depth will vary by model number: W1113: 24" minimum W1119: 25" minimum • Typically requires removal of unit's lid. Out of box unit height dimension without lid is 32 5/16"...
  • Page 4 Product Dimensions Easy Installation Kits 057B / 060B Notes • Connect Washer and Dryer to Easy Installation Kit • All installations must be done in accordnace with local codes • 057B Kit fitted with a NEMA10-30 Plug • 060B Kit fitted with a NEMA14-30 Plug...
  • Page 5 Product Dimensions Laundry Stand WTS420 - White Only Notes • For use with both large and super capacity washers or tumble dryers. • All installations must be done in accordnace with local codes NOTE: Drawing is not to scale. SPECIFICATION SHEETS 010706...
  • Page 6 • See "Cut-out Dimensions" sheet for undercounter or built-in space requirements • Optional Easy Installation Kits utilize existing 208-240 Volt - 30 Amp line to connect two Miele machines without rewiring . • Remove transport struts in rear of machine before installation.
  • Page 7: Panel Information

    These units come equipped with a full size white front panel. These units are also designed to either accept a thin insert or a custom front panel supplied by the custom cabinet maker. Sizes are as follows: Miele Decor Laundry unit...