Marking Private Entries; Beaming Information To Other Pdq Smartphones - Kyocera pdQ Basics Handbook Manual

Smartphone

Table of Contents

Marking Private Entries

In applications, you can mark individual entries as Private. Private entries

remain visible and accessible until you change the Security setting to hide all

Private entries. See "Chapter 15—Security" in the pdQ Applications Handbook

for complete information about how to use the Security settings.

To mark an entry as Private:

Display the entry that you want to mark as Private.

Tap Details.

Tap the Private check box.

Your pdQ smartphone is equipped with an IR (infrared) port that you can use

to "beam" information to another pdQ smartphone or a Palm connected

organizer with an IR port. You can beam the following:

The current Address Book, Date Book, To Do List, or Memo Pad entry

All Address Book, To Do List, or Memo Pad entries in the current category

Your "business card" (To create a business card, see "Chapter 1—Address

Book" in the pdQ Applications Handbook.)

An application that you have installed

To conserve power, your pdQ smartphone is delivered with the beam

Note:

feature turned off. To turn it on, see "Setting General Preferences" on

page 17.

To beam information:

Locate the entry you want to beam.

Tap

. Tap the Beam command from the Record menu.

Point the IR port (at the top of the back panel) at the IR port of the receiving

device. For best results, the pdQ smartphones should be from five

centimeters to one meter (approximately 2 inches to 40 inches) apart, and

the path between the two devices must be clear of obstacles.

Wait for the Beam Status dialog to indicate that the transfer is complete

before you continue working on the pdQ smartphone.

Chapter 4 Working with Organizer Features

Table of Contents