Kyocera pdQ Basics Handbook Manual page 84

Entering Network Preferences
Disabling Call Waiting
Call Waiting can cause your network session to end if you receive another call
while you are connected. If your telephone has Call Waiting, disable this
feature before logging into your ISP or dial-in server.
To disable Call Waiting:
Tap the Disable call waiting check box.
1.
Tap this box to
turn off Call
Waiting.
Tap the Disable call waiting line. Enter the disable code. Each telephone
2.
company assigns a code to disable Call Waiting. Contact your local
telephone company for the code you should use.
Using a Calling Card
You can use a calling card for your calls to an ISP or dial-in server. After
dialing the ISP, the pdQ smartphone enters your calling card number
automatically.
However, when you connect to a server, there is usually a delay before you
enter your card number. To produce this delay, you must add commas before
the card number. Each comma delays the transmission of the number for two
seconds. You'll need to experiment to determine the correct delay.
To use a Calling Card:
Tap the Use calling card check box.
1.
Tap the Use calling card line. Enter your calling card number.
2.
Tap OK to confirm your selection.
3.
80
Enter the disable
code here.
pdQ Basics Handbook