[ 4 ] Taking out the - and + Terminal ASSYs 65, +/- Terminals P1 and P3, and Battery
Terminals P2
(1) Unlatch the locking pawl of the - terminal ASSY 65 with the tip of the flat screwdriver
and from the bottom push the terminal ASSY up and out of the bottom cover.
(2) In the same manner as in step (1), remove the +/- terminals P1 and P3.
(3) Turn the bottom cover upside down, unlatch the locking pawl of the + terminal ASSY
65 with the flat screwdriver, and push the terminal out of the bottom cover.
Figure 2.2-9 Taking out the - and + Terminal ASSYs 65 and +/- Terminals P1 and P3
II - 12