2.2.2
Reassembly Procedure
[ 1 ] Soldering the Sub PCB Leads* and the + and - Terminal ASSYs 65 onto the Main
PCB
(1) European version: Solder the four lead wires of the sub PCB* to the main PCB
according to the wire ID colors as shown below.
(2) Solder the + and - terminal ASSYs 65 according to the wire ID colors as shown
below.
European version
US version
Figure 2.2-12 Soldering the Sub PCB Leads* and the + and - Terminal ASSYs 65
II - 15
*Provided on the European version.