3 ] Removing The Terminal Press Cover And Battery Terminals B - Brother PT-H100 Service Manual

[ 3 ] Removing the Terminal Press Cover and Battery Terminals B

CAUTION: When handling the PCBs, put on a grounding wrist band. Failure to do so
might break LSIs and other electronic devices.
(1) Press the two hooks on the terminal press cover inwards from the bottom of the
bottom cover with the tip of a flat screwdriver and push out the terminal press
cover. Release the - battery terminal (with the black lead of the power PCB
ASSY) and two battery terminals B from the terminal press cover.
(2) Remove the + battery terminal from the bottom cover.
Terminal press cover
Hook
- battery terminal
Bottom cover
Figure 3.1-5 Removing the Terminal Press Cover and Battery Terminals B
Hook
Battery terminals B
+ battery terminal
Hooks
III - 6
Flat screwdriver
Terminal press cover