Brother HL-7050 Service Manual page 93

6. NETWORK BOARD OPERATION (HL-7050N AND OPTION FOR HL-7050)
Installing the network board enables you to use the printer in the TCP/IP, IPX/SPX, AppleTalk,
DLC/LLC, Banyan VINES, DEC LAT and NetBEUI environments. Also, useful utilities such as
BR-Admin32 and network printing software for the administrator are included. For more
information about set up, see
6.1 Installing the Network Board
(1) Turn off the printer power, and then unplug
the power cord. Disconnect the interface
cable (printer cable) from the printer.
(2) Open the side cover.
(3) Loosen the three screws, and then remove
the metal plate by lifting up slightly.
(4) Unscrew the two screws, and then remove
the network cover plate.
section 3. 'INSTALL THE PRINTER' in this
2-63
HL-7050 SERVICE MANUAL
chapter.
Fig. 2-53
Fig. 2-54
Fig. 2-55