Brother HL-7050 Service Manual page 19

3.2 Functions
CPU
Emulation
Printer driver
Interface
Memory
Control Panel
Diagnostics
1
NOTE:
The standard memory installed varies depending on the country.
2
* NOTE:
The DIMM (Dual in Line Memory Module) must have the following specifications: -
Type:
Access time:
Capacity:
Height:
Output:
3.3 Options
Paper handling
Stabilizer
Storage Device
Toshiba TMPR4955 266MHz
Brother Printing Solution for Windows
Automatic emulation selection among HP LaserJet 5(PCL 6), Brother
BR-Script 3, HP-GL, EPSON FX-850 or IBM Proprinter XL
<PCL Driver>
Windows 95/98/Me, Windows NT 4.0/2000/XP driver, supporting
Brother Native Compression mode
<PS Driver>
PPD file driver for Windows 95/98/Me, Windows NT 4.0/2000/XP
driver and Macintosh driver
Bi-directional parallel
Universal Serial Bus (USB)
RS-232C
Network
HL7050/HL7050N : 32.0 Mbytes*
Expandable up to 288 Mbytes by installing an industry standard
2
DIMM*
Display LCD: 2 lines by 16-column liquid crystal display with
Buttons:
Self-diagnostic program
100 pin
60 nsec - 80 nsec
16, 32, 64, 128 Mbytes
35.0 mm (1.38 inches) or less
32 bit or 36 bit (independent of parity)
Lower tray unit (LT-7000); Maximum 500 sheets x 3 trays
Duplex unit for duplex printing (DX-7000)
Mailbox unit for output source (MX-7000 series)
Stabilizer for safe installation of the printer with options fitted (SB-
4000)
Hard Disk Drive (HD-EX), CompackFlash Card (Not provided by
Brother)
1
a three color back light
LED: 1 LED
7 buttons
1-5
HL-7050 SERVICE MANUAL