Brother HL-7050 Service Manual page 43

(9) Select Printer (USB), and then click the OK button.
(10) Click the Change...button in PostScript Printer Description (PPD) file. Select Brother HL-
7050 series, and then click the Select button.
(11) Click the Change...button in USB Printer Selection. Select HL-7050 series, and then click
the OK button.
(12) Click the Create...button.
(13) Enter your printer name (HL-7050 series), and then click the Save button.
(14) Select Quit from the File menu.
3.3.4 Setting Your Printer as the Default Printer (For Mac OS8.6 to 9.2 Users)
(1) Click the HL-7050 series icon on the Desktop.
(2) Select Set Default Printer from the Printing menu.
*The setup is now complete.
3.3.5 Connecting the Printer to Your Macintosh & Installing the BR-Script PPD File
(1) Make sure the printer power switch is on.
(2) Connect the USB interface cable to your Macintosh, and then connect it to the printer.
NOTE:
Do not connect the USB cable to the keyboard USB Port or a non-powered USB Hub.
(3) Insert the CD-ROM into your CD-ROM drive. Open the Mac OS X folder.
(4) Double click the PPD_Installer.pkg icon. Follow the instructions on the screen.
(5) Open the Macintosh HD icon.
(6) Open the Applications folder. Open the Utilities folder.
(7) Open the Print Center icon.
(8) Click the Add Printer.... Button.
(9) Select USB.
(10) Select HL-7050 series, and then click the ADD button.
(11) Select Quit Printer Center from the Printer Center menu.
*The setup is now complete.
3.4 For Network Users
NOTE:
For connecting the printer to a network, it is recommended to contact the system
administrator prior to installation.
For the administrator: Configure the printer referring to the following instructions.
For installing the driver on the PC, refer to the following instructions once the administrator
has configured the printer.
2-13
HL-7050 SERVICE MANUAL