Brother HL-7050 Service Manual page 45

3.4.2. Installing the driver for Windows
(1) Turn off the printer power switch.
(2) Connect the network interface cable to the printer, and then connect it to a free port on your
hub.
(3) Turn on the printer power switch.
(4) Put the CD-ROM into your CD-ROM drive. The opening screen will appear automatically.
Follow the instructions on the screen.
(5) Click "Install Software" icon on the Menu screen.
(6) Click "Printer Driver".
(7) Click the Next button. Follow the instructions on the screen.
(8) Select "Standard Installation", and then click the Next button.
For Network shared printer users
(1) Select the "Network Shared Printer", and then click the Next button.
(2) Select your printer's queue, and then click the OK button.
(3) Click the Finish button.
* The setup is now complete.
©
users only
Fig. 2-21
2-15
HL-7050 SERVICE MANUAL