Pre-Operation Check; Engine Oil - Honda EB3500X Owner's Manual

PRE-OPERATION CHECK
Engine Oil
Engine oil is a major factor affecting engine performance and service
life. Non-detergent and 2-stroke engine oils will dapage the engine
and are not recommended.
Check the oil level BEFORE SAE
EACH USE with the generator on
a level surface and the engine
stopped.
Use 4-stroke motor oil that
meets or exceeds the require-
ments for API service classifi-TEMp-2r,
cation SF or SG. Always check
o 2,, 40
80 100°F
1
I
I
I
I I
1
the API SERVICE label on the oil
-30 -20 -10 0 10 20
30 40°C
container to be sure it includes
the letters SF or SG.
AMBIENT TEMPERATURE
SAE low-30 is recommended for general, all-temperature use. Other
viscosities shown in the chart may be used when the average
temperature in your area is within the indicated range.
l.Remove the oil filler cap and wipe the dipstick clean.
2.Check the oil level by inserting the dipstick into the filler neck
without screwing it in.
3.lf the level is low, fill to the top of the oil filler neck with the
recommended oil.
OIL FILLER HOLE
UPPER LEVEL
\
OIL FILLER CAP
24