Advertisement
Quick Links
Advertisement
Related Manuals for Bowers & Wilkins CWM7
Summary of Contents for Bowers & Wilkins CWM7
- Page 1 English CWM7...
- Page 2 Welcome to Bowers and Wilkins and the CWM7 Series Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and it inspires every product we design.
- Page 3 1. CWM7 Carton Contents 2. CWM7 Series Basics CWM7.3 CWM7.4 CWM7.3 • CWM7 Series speaker assembly (baffle, frame/back CWM7 Series in-wall speakers comprise a baffle box, grille) carrying the speaker drivers and crossover, an • Reservoir box integrated back-box and front flange, and a •...
- Page 4 3. Positioning CWM7 Series Speakers CWM7.5 Multi-channel Audio Applications All CWM7 Series speakers require a clear depth of The appropriate position for CWM7 Series speakers 102mm (4.02 in) from the front of the ceiling surface. within the listening environment will depend on their For applications where multiple CWM7 Series speakers specific application: are to be used for multi-channel audio visual systems...
- Page 5 4. Installing CWM7 Series Speakers 4.2 The reservoir box enhances the low frequency 4.3 If speaker cable is already present in the wall To install a CWM7 Series speaker proceed as described in the following paragraphs: performance of CWM7 Series speakers. It connects space, pull the cable through the aperture.
- Page 6 4.4 Now connect the speaker cable to the spring 4.5 With the back box connected to the cable and its 4.6 If the back box flange is to be painted it should be terminals on the side back box, first looping the reservoir box attached it may be inserted into the wall done at this stage.
- Page 7 4.7 The baffle can now be inserted into the back box. CWM7.3 Baffle Insertion With the MF/HF baffle in the correct orientation the The baffle insertion and attachment technique is slightly If the CWM7.3 is to be used in landscape orientation baffle assembly can be lifted and inserted in the back different in the case of the CWM7.3 and CWM7.4/5.
- Page 8 4.8 A port plug accessory is included with CWM7 CWM7.4 and CWM7.5 Baffle Insertion The CWM7.4/5 baffle assembly is held in the back Series speakers. The plug can be used if desired to box by a combination of hinge features and push-lock reduce bass output by obstructing the speaker’s reflex port.
- Page 9 4.9 The grille can now be fitted to the baffle. It is held in place magnetically so simply needs to be aligned with the groove in the back box flange where it will click into place. The diagram above illustrates fitting the grille. The CWM7 Series speaker is now installed and ready for use.
- Page 10 B&W Group Ltd B&W Group (UK Sales) Copyright © B&W Group Ltd. E&OE Dale Road T +44 (0) 1903 221 500 Worthing West Sussex E uksales@bwgroup.com BN11 2BH England B&W Group North America T +44 (0) 1903 221 800 T +1 978 664 2870 F +44 (0) 1903 221 801 E marketing@bwgroupusa.com info@bwgroup.com...