Playback; Repeat Play; Random Play); Scanning Programs - Alpine CDA-9820XM Owner's Manual

CD
SOURCE/
POWER -/J
g f SEARCH/
QS

Playback

1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
The CD player begins playback from the first track on the
disc. When a disc is already inserted, press SOURCE/
POWER to switch to the CD mode.
The mode will change every time the button is pressed.
TUNER → XM → CD → CD CHANGER* → TUNER
* Only when the CD changer is connected
2
Press g or f to select the desired track.
Returning to the beginning of the current track:
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track:
Press f.
Fast forward :
Press and hold f.
3
To pause playback, press -/J.
Pressing -/J again will resume playback.
4
To eject the disc, press c.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• Three-inch (8cm) CD's can be used.
• If the CD is not removed for 15 seconds after it has been ejected,
the player automatically draws the CD into the compartment to
protect the CD.
10
-EN
Rotary
c
encoder
4( ) 5( ) 6(

Repeat Play

Press 4 ( ) to play back repeatedly the track being
played.
The track will be played repeatedly.
Press 4 ( ) again and select OFF to deactivate repeat play.
RPT: Only a track is repeatedly played back
↓
(off)
)
M.I.X. (Random Play)
Press 5 ( ) in the play or pause mode.
The tracks on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5 (
↓
M.I.X.: Track are played back in
↓
random sequence.
(off)
• A disc that contains more than 40 tracks may not be correctly
played back with the M.I.X. function.

Scanning Programs

Press 6 ( ) to activate the Scan mode.
The first 10 seconds of each track will be played back in
succession.
To stop scanning, press 6 (

Track Search

You can search for tracks.
1
Press SEARCH/QS
Track Search mode.
2
Select a desired track by turning the Rotary
encoder within 10 seconds.
3
Press the Rotary encoder to play back the
selected track.
• Search mode in Track Search mode is canceled by pressing and
holding SEARCH/QS

Quick Search

You can search for tracks.
1
Press and hold SEARCH/QS
in the CD mode to activate Quick Search mode.
2
Turn the Rotary encoder within 10 seconds to
select a desired track.
The selected track is played back immediately.
• Search mode is canceled by pressing and holding SEARCH/QS
for at least 2 seconds in Quick Search mode.
) again.
) and deactivate the Scan mode.
in the CD mode to activate
for at least 2 seconds.
for at least 2 seconds