SETUP
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from General Customizing, External
Device, to select your desired setting.
SOURCE/
BAND/
POWER
TEL.
MODE (Rotary encoder)
g
f
The common operation for SETUP is step 1 to 4 as
follows. See down below for further information
about each SETUP menu.
1
Press and hold F/SETUP for at least 3 seconds.
SETUP mode is activated.
2
Press g or f to select the desired SETUP
menu.
(e.g. Select SUBW (Subwoofer))
SUBW → CD-DA / CD/MP3*
→ (AUX name)*
→ PWR → TEL*
2
ADF → SUBW
1
*
CD-DA/CD/MP3 is displayed when an MP3 compatible CD
changer is connected. Refer to "Playing MP3 Data" on page 18.
2
*
Displayed only when AUX is ON.
*
3
TEL is displayed when the Alpine MobileHub is connected. Refer
to "Setting the Automatic Calling" on page 19.
3
Press BAND/TEL. to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press F/SETUP again.
The display returns to normal mode.
General Customizing
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 Press the MODE (Rotary encoder) repeatedly to select
the SUBW mode.
SUBW* → BALANCE → FADER → DEFEAT → VOLUME →
SUBW
* Displayed when Subwoofer is set to ON.
2 Turn the Rotary encoder until the desired sound is
obtained.
F/SETUP
→ SCR → MUTE → INT→ AUX
1
→ CH NO/ALPHABET →
3
Scroll Setting
SCR AUTO / SCR MANU (Initial setting)
This XM Radio can scroll the channel name, category, artist, and song
title. If connected with a CD text compatible CD changer or MP3
compatible CD changer, this unit can scroll the disc and track names
recorded on CD-TEXT discs, as well as the text information of MP3
files, folder names, and ID3 tags.
SCR AUTO : Channel name, category, artist and song title
(XM Radio), and CD text information, the text information of
folder and file names, and ID3 tags are scrolled automatically.
SCR MANU : The display is scrolled only when a disc is
loaded or when a track is changed, etc.
• The disc titles input manually (page 14) cannot be scrolled.
External Device
Turning Mute Mode On/Off
MUTE ON (Initial setting)/ MUTE OFF
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from
the device.
Setting the AUX Mode (V-Link)
AUX ON / AUX OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/
RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-
410C) to this component.
You can change the AUX name display when AUX ON is set. Select
the AUX name by pressing g or f. Then press BAND/TEL.
If the KCA-410C is connected, it is possible to select two AUX
names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/POWER to select AUX
mode and then press BAND/TEL. to select your desired device.
15
-EN