Exterior Lighting And Signals; Daytime Running Lights - Renault Espace Driver's Handbook Manual

eXTerIOr LIGHTInG and sIGnaLs

1
2
side lights
u
Turn the end of stalk 1 until the
symbol is opposite mark 3.
The instrument panel lights up, the
brightness can be adjusted by using
control knob 2.
(1/3)
3
1
dipped beam
k
headlights
automatic operation
With the engine running, the dipped
beam headlights are switched on or off
automatically depending on the level of
ambient light, without the need to oper-
ate stalk 1 (position 0).
This function can be deactivated or re-
activated.
– To deactivate it, with the ignition
on and engine switched off, turn
stalk 1 twice consecutively from po-
sition 0 to side lights. This action is
confirmed by an audible signal.
– To activate it, with the ignition
switched on and engine running or
off, turn stalk 1 twice consecutively
from position 0 to side lights. This
action is confirmed by an audible
signal.
– To select the main beam headlights,
pull stalk 1 towards you. To return to
the dipped beam headlight position,
pull the stalk towards you again.
– The lights go out when the engine
is stopped, when the driver's door is
opened or when the vehicle is locked
with the RENAULT card.
Manual operation
Turn the end of stalk 1 until the symbol
is opposite mark 3.
An indicator light lights up on the instru-
ment panel in all cases.

daytime running lights

The daytime running lights come on
when the engine is started if stalk 1 is
in position 0.
If the dipped beam headlights oper-
ate automatically, the daytime running
lights only come on if the side lights are
off
1.67