Renault Espace Driver's Handbook Manual page 114

cRUISE cONTROL - SPEED LIMITER: cruise control function
2
5
Putting the function on
standby
The function is interrupted when you:
– depress the brake pedal,
– depress the clutch pedal or shift into
neutral if the vehicle has an auto-
matic gearbox,
– press button 4.
In all three cases, the cruising speed is
memorised.
2.32
Recalling the cruising speed
If a speed has been memorised, it is
possible to recall it by pressing button 3,
on condition that you are driving faster
than 18 mph (30 km/h) and that you
are sure that the driving conditions are
suitable (traffic, road surface condition,
3
weather conditions, etc.).
4
Pressing button 2 or 5 reactivates
the cruise control function without
taking into account the memorised
speed: it is the speed at which the
vehicle is moving that is taken into
account.
(continued)
1
Switching off the function
Press on/off switch 1: in this case, the
speed is no longer stored.
The instrument panel indicator light
goes out, confirming that the function is
stopped.
Putting the cruise control
on standby or switching it
off does not cause a rapid
reduction in speed: you
must brake by depressing the brake
pedal.