Cisco RVS4000 - Gigabit Security Router Administration Manual page 33

Setting Up and Configuring the Router
Setup
Cisco RVS4000 Security Router with VPN Administrator Guide
Connect on Demand: Max Idle Time
Internet connection after it has been inactive for a specified period of time (Max
Idle Time), and then automatically re-establish the connection as soon as you
attempt to access the Internet again. To activate Connect on Demand, select the
Connect on Demand option and enter in the Max Idle Time field the number of
minutes of inactivity that must elapse before your Internet connection is
terminated automatically.
Keep Alive: Redial period
your Internet connection. If you are disconnected, then the router automatically re-
establishes your connection. To use this option, click the radio button next to Keep
Alive. In the Redial Period field, specify how often you want the router to check
the Internet connection. The default Redial Period is 30 seconds.
Click Save to save your changes, or click Cancel to undo your changes.
Heart Beat Signal
Heart Beat Signal is a service used in Australia. Check with your ISP for the
necessary setup information.
Heart Beat Signal
User Name and Password
ISP.
Heart Beat Server Enter the IP address of the Heart Beat server.
You can configure the router to cut the
If you select this option, the router periodically checks
Enter the User Name and Password provided by your
5
33