Setting Up A Remote Access Tunnel For Vpn Clients (Client To Gateway) - Cisco RV016 - Small Business - 10/100 VPN Router Administration Manual

VPN

Setting Up a Remote Access Tunnel for VPN Clients (Client To Gateway)

Setting Up a Remote Access Tunnel for VPN Clients (Client To
Gateway)
NOTE
Cisco Small Business RV0xx Series Routers Administration Guide
Use VPN > Client To Gateway page to create a new VPN tunnel to allow
teleworkers and business travelers to access to your network by using third-party
VPN client software, such as TheGreenBow.
For information about third-party clients, see application notes by visiting
www.cisco.com/go/smallbizrouters
DNS Server
Inside
Internal
192.168.1.1
network
WINS Server
192.168.1.30
To open this page: Click VPN > Client to Gateway in the navigation tree.
Alternatively, you can click the Add Tunnel button on the VPN > Summary page, in
the Tunnel Status section. Then choose Client to Gateway.
(see the Technical Documentation section).
RV0xx
router
Outside
209.165.200.226
Personal Computer
Using VPN Software Client
Internet
Personal Computer
Using VPN Software Client
Personal Computer
Using VPN Software Client
9
139