Setting Up Advanced Routing - Cisco RV016 - Small Business - 10/100 VPN Router Administration Manual

Setting Up Advanced Routing

Setting Up Advanced Routing

NOTE
Cisco Small Business RV0xx Series Routers Administration Guide
Advanced Routing
Use the Setup >
routing settings and to view current routing information.
To open this page: Click Setup > Advanced Routing in the navigation tree.
Before navigating away from this page, click Save to save your settings, or click
Cancel to undo them. Any unsaved changes are abandoned.
Perform the following tasks:
• To configure static or dynamic routing: Click the IPv4 or IPv6 tab, and
then enter the settings. See these topics:
- Configuring Dynamic Routing, page 58
- Configuring Static Routing, page 59
• To view current data: Click View near the bottom of the page. The Routing
Table Entry List appears. You can click Refresh to update the data, or click
Close to close the pop-up window.
page to configure the dynamic and static
3
57