Changing The Administrator Password - NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
2. Use something with a small point, such as a pen, hold the Reset button for 5 seconds while you
Power On the WNDAP350.
3. Continue holding the Reset Button until the LEDs blink twice.
4. Release the Reset Button.
The factory default configuration has now been restored and the WNDAP350 is ready for use.

Changing the Administrator Password

The default password is password. You should change this password to a more secure password,
since you cannot change the administrator login name.
To change the Administrator password:
1. Under the Maintenance tab on the main menu, select Password, and then select Change
Password. The Change Password screen displays as shown in
Figure 3-8 Change administrator password
2. First enter the old password in the Current Password field.
3-10
v1.1, November 2009
Figure 3-8 below.
Management