Changing The Administrator Password - NETGEAR WNR1000v3h2 User Manual

Figure 13.
2. Select any of the following Wireless settings:
- Enable Guest Network – When this check box is selected, the guest network is
enabled, and guests can connect to your network using the SSID of this profile.
- Enable SSID Broadcast – If selected, the Wireless Access Point broadcasts its
name (SSID) to all Wireless Stations. Stations can adopt the correct SSID for
connections to this Access Point.
- Allow Guest to access MY Local Network – If selected any user who connects to
this SSID can access local networks associated with the router like users in the
primary SSID.
3. Give the wireless network a name.
The name is case-sensitive and can be up to 32 characters. The same name must be
assigned to all wireless devices in your network. NETGEAR recommends that you
change the name to a different value.
4. Select a Security option from the list.
5. Click Apply to save your selections.

Changing the Administrator Password

The default password for the router's Web Configuration Manager is password. NETGEAR
recommends that you change this password to a more secure password.
38 | Chapter 2: Safeguarding Your Network
N150 Wireless Router User Manual