Using Activity Log Information; Viewing General Summary Information - NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
5. Click Apply to save your SysLog settings.

Using Activity Log Information

The Activity Log screen displays the Access Point system activity.
To view the Activity Log, under the Monitoring tab on the main menu, click Logs. The Activity
Logs screen displays as shown in Figure 3-10 below.
Figure 3-10 View activity logs
The Activity Log Window displays the Access Point system activity.
Click Refresh to update the display, click Clear to clear the log content, or click Save As to save
the log contents into a file on a disk drive.

Viewing General Summary Information

The System screen, under the Monitoring tab provides a summary of the current WNDAP350
configuration settings, including current IP settings and current Wireless settings. This information
is read only, so any changes must be made on other pages.
To access the System screen:
3-12 Management
v1.1, November 2009