Logging In Using The Default Ip Address - NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

Logging In Using the Default IP Address

After you install the WNDAP350, log in to the wireless access point to configure the basic settings
and the wireless settings. The WNDAP350 is set, by default, with the IP address of 192.168.0.237
with DHCP disabled.
Note: The computer you are using to connect to the WNDAP350 should be configured
with an IP address that starts with 192.168.0.x and a Subnet Mask of
255.255.255.0.
To log in using the default IP Address:
1. Open a Web browser such as Internet Explorer or Mozilla Firefox.
2. Connect to the WNDAP350 by entering its default address of http://192.168.0.237 into your
browser. The login screen displays. Enter admin for the user name and password for the
password, both in lower case letters.
Figure 2-8 Connecting to the Access Point
3. Click Login.
Your Web browser should automatically find the WNDAP350 wirelss access point and display
the home screen.
2-12
v1.1, November 2009
Basic Installation and Configuration