Connectivity; Internet Access Points; Set Up An Internet Access Point For Data Calls; Advanced Internet Access Point Settings For Data Calls - Nokia E70 User Manual

6.

Connectivity

Copyright protections may prevent some images, music (including ringing tones), and other content from being copied,
modified, transferred or forwarded.
Your device offers several options to connect to the Internet, a corporate intranet, or to another device or PC. Wireless methods
include wireless LAN, Bluetooth, and infrared. Your device supports a wired solution with a USB (Universal Serial Bus) cable
connection for Nokia PC Suite or IP passthrough. Your device also allows you to communicate using net calls (Voice over IP),
push to talk, instant messaging (chat), and modem-based connections.

Internet access points

An access point is where your device connects to a network. To use e-mail and multimedia services or to connect to the Internet
and browse web pages, you must first define Internet access points for these services. You may need to set up several Internet
access points, depending on the sites you want to access. For example, browsing the Web may require one access point, and
accessing your company intranet may require another. To connect to the Internet over GPRS, your device may have predefined,
default Internet access point settings.
When you switch on your device for the first time, the access points may be configured automatically based on the service
provider information in your SIM card. You can also receive the access points settings in a message from your service provider.
This might reduce the number of settings you need to enter yourself.
The available options may vary. Some or all access points may be preset for your device by your service provider. You may not
be able to add, edit, or delete access points.
Contact your service provider and e-mail service provider for more information on access points and their settings.
See "Connection settings," p. 70.

Set up an Internet access point for data calls

1. Select Menu Tools
> >
2. Select Options New access
>
start with an empty access point, select
3. Define the following settings.
Connection name — Enter a descriptive name for the connection.
•
Data bearer — Select
•
Dial-up number — Enter the modem telephone number of the access point. Use + before international numbers.
•
User name — Enter your user name if required by the service provider. User names are often case-sensitive and provided
•
by your service provider.
Prompt password — Select
•
device memory and automate the login.
Password — Enter your password if required by the service provider. The password is often case-sensitive provided by
•
the service provider.
Authentication — Select
•
when possible.
Homepage — Enter the Web address of the page you want to display as a home page when you use this access point.
•
Data call type — Select
•
Max. data speed — Select the limit to apply to the transfer speed. If you select Automatic, the data transfer rate is
•
determined by the network and may be affected by network traffic. Some service providers may charge more for higher
data rates.
4. After defining the basic settings, select
settings and exit.

Advanced Internet access point settings for data calls

After setting up a basic Internet access point for
and define the following advanced settings.
IPv4 settings — Enter the device IP and name server addresses for IPv4 Internet protocol.
•
IPv6 settings — Enter the device IP and name server addresses for IPv6 Internet protocol.
•
Proxy serv. address — Enter the proxy server address.
•
Proxy port number — Enter the proxy server port number. Proxy servers are intermediate servers between a browsing service
•
and its users, which are used by some service providers. These servers may provide additional security and speed up access
to the service.
Use callback — Select Yes
•
Copyright © 2006 Nokia. All Rights Reserved.
Settings Connection Access
> >
point. To use an existing access point as a basis for the new one, select
Use default
Data call or High speed data (GSM
Yes to enter your password each time you log into a server or
Secure to always send your password encrypted or
Analogue or ISDN.
Options
Data call
if you have a service that dials back to your device when you establish an Internet connection.
points.
settings.
only).
Advanced settings to define the advanced settings or
>
or High speed data (GSM
42
Use existing
No to save the password in your
Normal to send your password encrypted
Back
only), select Options Advanced
>
settings. To
to save the
settings,