MOTU HDX-SDI User Manual page 50

1 Connect an RS-422 cable from HDX-SDI to the
video deck or other machine control device.
2 Make sure the video deck is configured properly
for remote operation via RS-422 machine control.
3 In MOTU Video Setup, choose Sony 9-Pin from
the Timecode Source menu (Figure 6-4 on
page 35), which is found in the Setup tab, or choose
LTC if your deck is feeding timecode to the
computer via the LTC input (instead of via 9-pin).
4 Back in Final Cut Pro, choose the device control
preset that best suits your project and device. This
setting can be accessed in the Audio/Video Settings
window (Final Cut Pro menu) or in the Capture
Settings tab in the Log and Capture window.
You can now use Final Cut Pro's transport features
to control your deck. Consult the Final Cut Pro
documentation for complete information about
using machine control during capture, edit to tape
and print to video operations.
50
F I N A L C U T P R O