MOTU HDX-SDI User Manual page 35

SETUP TAB
The Setup tab (Figure 6-4) provides several general
settings for HDX-SDI operation.
Default Mode
The HDX-SDI has two modes of operation:
Capture and Playback. Your host video software
determines the mode, depending on what you are
doing (i.e. capturing or playing back the timeline).
The Default Mode setting (Figure 6-1) lets you
choose which mode the HDX-SDI enters when the
host relinquishes control over the HDX-SDI
hardware, such as when you quit or switch out of
your host software. If you spend most of your time
just monitoring or just capturing, operation will be
faster if you set this to the mode you expect to use
most.
Figure 6-4: Setup tab.
M O T U V I D E O S E T U P
Capture Clock Source
The Capture Clock Source setting (Figure 6-4) lets
you specify the timing reference for the HDX-SDI
when it is in Capture mode. Three choices are
provided in the menu, as shown below in
Figure 6-5:
Figure 6-5: Capture Clock Source menu.
Input Source
Choose Input Source (Figure 6-5) when you wish to
resolve the HDX-SDI to the video signal being
received on the currently chosen input in the Input
Source menu (Figure 6-3).
35