Language F; Stand-By; Memory - Miele W 2662 WPS Operating Instructions Manual

To save energy, the display goes out
after 10 minutes and the Start/Stop T
will start flashing slowly.
There are two options:
On
Stand-by comes on:
– if a programme is not selected after
the machine has been switched on.
– after a programme has started.
– at the end of a programme.
Not in current Prog. (the machine is
delivered with this option selected)
Stand-by comes on:
– if a programme is not selected after
the machine has been switched on.
– at the end of a programme.
Pressing one of the buttons switches
the display back on again.
A tick will appear beside the option to
show that it has been set.
C
Back A
Q
On
Not in current prog. B
^ Select the option you want and
confirm your selection.
70
J
If an Extra has been selected for a
programme, or the recommended
spin speed has been altered, the
machine will store the changes in
memory at the start of a programme.
When this programme is chosen again
these settings will appear in the display.
The washing machine is delivered with
the memory function deactivated.
A tick will appear beside the option to
show that it has been set.
C
Back A
V Off B
On
^ Select the option you want and
confirm your selection.
C
Back A

LANGUAGE F...

TIME OF DAY ...
^ Select Back and confirm your
selection.
H