Miele W 2662 WPS Operating Instructions Manual page 20

Cottons
Minimum Iron
Delicates
Automatic
Quick wash
Woollens
Silks
Denim
Shirts
Outer wear
Spin
Separate rinse
Starch
You can reduce the final spin speed.
You cannot select a final spin speed
higher than that shown in the chart
above.
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected in a
Cottons programme, an additional rinse
is introduced.
20
^ Select the Rinse hold setting. The
laundry will not be spun and will
1800
remain suspended in the final rinse
900
water. This reduces creasing if the
600
laundry is not going to be removed
900
from the drum immediately after the
1600
end of the programme.
1200
– To start the final spin:
400
900
The washing machine will display the
maximum spin speed possible. You
600
can select a spin speed lower than
800
this. Start the final spin by pressing
1800
the Start/Stop T button.
1200
– To end the programme:
1500
Press the Door button. The water will
drain away. Press the Door button
again, to open the door.
^ Select the Without spin setting. The
laundry is not spun after the final
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage. An additional rinse
is introduced if this setting is selected
with the Cottons , Minimum iron , Auto-
matic and Quick wash programmes.